Protects users from electrocution, equipment from failure, lightning strikes, power line faults & isolates each circuit.
BOOLEAN ENGINEERING Pty Ltd – EASYsafe ES240-RCBO Mains Overload Protection and User Safety. The EASYsafe is a single line mini switch board that provides a simple but effective way to protect both personnel and equipment from mains electricity faults.
No electrician is needed as the unit is connected by the user to the mains via the IEC connectors.
The ES240-RCBO is a combination of overload circuit breaker (CB), Lightning and Over-voltage Surge Protection and Residual Current Device (RCD) in a small self contained enclosure.
The EASYsafe protects users from electrocution, equipment from failure, lightning strikes, power line faults and isolates each circuit so all other installed devices remain on line and the faulty device is immediately obvious.
Where is the EASYsafe Used?
It is common practice to protect multiple end load circuits through a single switch board circuit breaker backed up by RSDs.
This only translates into multiple end loads being disconnected by the operation of the protection system in the event of a fault on a single device, bringing down the entire system.
This can have a significant impact on end users in the event of a fault and can add a level of complexity to fault finding as well as endangering mission critical systems.
The EASYsafe protects a single circuit to the attached equipment and it user and all other installed devices remain on line.
How is the EASYsafe used?
1. For surface mounting, remove the two securing screws on the front panel.
2. Affix the enclosure base via the 4 corner holes and fit the plastic covers.
3. Refit the enclosure front panel with the 2 screws from (1) above
4. Ensure that the circuit breaker switch is in the OFF (down) position.
5. Connect the IEC C14 plug to the mains 240 volt A.C. power.
6. Switch power on at the mains power wall outlet.
7. Switch the circuit breaker to the on position (UP)
8. Test the Residual Current Safety Switch as below.
9. Connect the load to the IEC C13 socket.
Click here for Price & To Order
Above link will open in new window on manufacturers website allowing you to buy direct.
Genuine Australian Made Product – Click here to see Why it Pays to Buy Australian-Made Products.
Like us on facebook – If you would like to see regular updates and be advised when new products are released.
To find out more about BOOLEAN ENGINEERING Pty Ltd – CLICK HERE.
.
BOOLEAN ENGINEERING Pty Ltd has business opportunities available for entrepreneurs; re-sellers, existing wholesalers, agents & distributors to sell their products – worldwide and in all areas of Australia.
To find out more about the Business Opportunities with BOOLEAN ENGINEERING Pty Ltd – CLICK HERE.
